Electrical components used in industrial equipment often operate under a combination of heat, voltage, vibration, and mechanical stress. Motors, transformers, heating systems, and electronic assemblies all contain wiring and connection points that need dependable insulation. Choosing an appropriate sleeve is therefore not simply a matter of covering exposed conductors; the material must also suit the temperature range, electrical conditions, and physical environment in which it will be installed.
Among the available insulation materials, polyimide film is used in applications where thermal and electrical properties are important. Its tubular form provides a practical way to cover selected wires, joints, and electrical components without relying on flat insulating materials that require additional forming during assembly.
The Polyimide Film Tubing SB-PFT is designed for this type of application. Made from twisted polyimide film bonded with a specialized adhesive, it offers a range of inside diameters, wall thicknesses, and lengths for different insulation requirements. Understanding its construction and specifications can help equipment manufacturers determine whether it is suitable for their electrical assemblies.
Why Electrical Equipment Needs Specialized Insulation Sleeves
Heat is an unavoidable part of many electrical processes. Motor windings generate heat through electrical losses, transformers warm up under load, and heating appliances intentionally operate at elevated temperatures. At the same time, wiring and connection points may be exposed to vibration, friction, bending, or contact with nearby components.
An insulation sleeve must therefore be evaluated against several operating conditions.
-
Thermal exposure: The material should be appropriate for the temperatures encountered at the installation point, including temperature fluctuations during startup and continuous operation.
-
Electrical insulation: Surface and volume resistivity, dielectric behavior, and voltage-related test results help engineers evaluate insulation performance.
-
Mechanical protection: Wiring assemblies may experience abrasion, movement, or contact with surrounding structures. A sleeve can provide an additional protective barrier.
-
Environmental compatibility: Oils, moisture, solvents, acids, and other substances may affect material suitability depending on their concentration and exposure conditions.
No single specification can determine whether a sleeve is suitable for every application. Engineers should consider the complete operating environment and verify the material's performance against the actual equipment requirements.
Construction and Design of Polyimide Film Tubing
The manufacturing structure of an insulation tube affects its dimensions, handling characteristics, and intended use. SB-PFT is produced by twisting polyimide film into a tubular form and bonding it with a special adhesive. According to the product information, the adhesive has chemical characteristics similar to polyester film.
This construction provides a ready-made sleeve that can be positioned around compatible conductors, joints, and electrical components. Compared with applying flat film manually, a tubular format can simplify the covering process in assemblies where the required dimensions are suitable.
The product is available in a range of sizes:
| Specification | Available Range |
|---|---|
| Inside diameter | 2.0–65 mm |
| Wall thickness | 0.05–0.5 mm |
| Standard length | 10–1800 mm |
| Color | Light yellow |
The range allows manufacturers to select different configurations for small wiring connections as well as larger components. Custom sizes are also available upon request, subject to technical confirmation.
When evaluating a tube, buyers should check the dimensions of the component being covered and consider the installation method. The inside diameter needs to accommodate the component, while the wall thickness and length should correspond to the intended coverage and protection requirements.
Understanding the Temperature Specifications
Temperature capability is one of the major considerations when selecting insulation materials for motors, transformers, and heating equipment.
The SB-PFT specification lists a working temperature range of -60°C to +220°C. It also gives a service temperature range of -269°C to 260°C and a melting point of 250°C to 265°C.
These figures describe different characteristics and should not be interpreted as interchangeable ratings. In particular, the stated service temperature range should not automatically be treated as a continuous operating recommendation. Buyers should confirm the applicable test conditions and product guidance with the manufacturer before using the tubing in demanding thermal environments.
The most useful starting point for selection is the temperature at the actual installation location. For example, a connection inside a motor may experience different thermal conditions from wiring routed along the outside of the housing. Similarly, the temperature around a transformer connection may vary according to electrical loading and equipment design.
For this reason, equipment manufacturers should assess both normal operating temperatures and possible temperature excursions. They should also consider whether the adhesive bonding and complete tube construction are appropriate for the intended exposure duration.
Electrical Properties and Insulation Evaluation
Thermal resistance is only one part of electrical insulation performance. Resistivity and dielectric characteristics also matter, particularly when the sleeve is used around connections or conductors exposed to electrical stress.
The listed electrical properties of SB-PFT include:
| Electrical Characteristic | Product Specification |
|---|---|
| Surface resistivity at 200°C | ≥1.0 × 10¹³ |
| Volume resistivity at 200°C | ≥3.8 × 10¹⁰ |
| Dielectric coefficient at 50 Hz | 3.5 |
| Dielectric loss at 50 Hz | ≤4 × 10⁻³ |
| Resistance pressure test | 50 Hz, 115 MV/min, not perforative |
Surface resistivity describes resistance to electrical conduction along the material's surface. Volume resistivity relates to electrical conduction through the material. Both are useful reference points when evaluating insulation materials for electrical assemblies.
The dielectric coefficient and dielectric loss provide additional information about how a material behaves in an alternating electric field. These characteristics can be relevant when selecting insulation for equipment where dielectric behavior needs to be considered.
The product information also lists a resistance pressure test result. For engineering approval, buyers should request the detailed test method, units, sample preparation conditions, and supporting test documentation. This helps ensure that the reported result is interpreted correctly and compared with the applicable equipment requirements.
Mechanical Strength and Chemical Compatibility
Insulation tubing may be exposed to physical contact and environmental substances during both installation and equipment operation. A sleeve used around a wiring connection, for example, may need to tolerate handling, friction, or nearby mechanical movement.
SB-PFT specifies tensile strength of at least 130 MPa in the longitudinal direction and 110 MPa in the horizontal direction. These values provide a reference for assessing the mechanical strength of the tubing structure.
The supplied product information also describes resistance to abrasion, immersion, mildew, mechanical damage, acids, industrial solvents, Freon, and special liquids. It indicates that the material remains undissolved in the listed acids, oils, paints, and industrial solvents, with negligible corrosive effects on copper.
These characteristics may be relevant in industrial assemblies where insulation materials are exposed to surrounding substances or conductive components. However, chemical compatibility depends on the specific chemical, its concentration, exposure temperature, and contact duration. For demanding environments, buyers should verify compatibility under representative operating conditions rather than assuming that general resistance descriptions cover every substance.
Industrial Applications of Polyimide Film Tubing
The combination of a tubular structure and specified electrical and thermal characteristics makes polyimide film tubing a candidate for a variety of electrical insulation applications.
Motors and Transformers
Motors and transformers contain multiple winding leads, terminals, and electrical connections. These areas may experience heat generated during operation as well as electrical stress.
Tubing can be used to cover selected conductors and connection points when its dimensions and verified performance meet the equipment design requirements. The available diameter range also gives manufacturers flexibility when working with different wiring configurations.
Wire Harnesses and Electrical Connections
Wire harnesses are widely used in automotive systems, industrial machinery, household appliances, and electronic equipment. Conductors may pass through confined spaces or connect to terminals where additional insulation is required.
A suitable sleeve can provide a defined protective covering around selected wiring sections and connection areas. During selection, manufacturers should consider the routing path, installation clearance, and the amount of coverage required.
Heating Equipment and Electrical Appliances
Heating elements and related wiring can create localized high-temperature conditions. Insulation materials used near these areas must be selected according to the temperature at the actual installation point.
Polyimide film tubing may be considered for suitable connections and wiring sections when the complete product construction is compatible with the operating temperature and surrounding environment.
Capacitors and Electronic Assemblies
Electronic equipment contains numerous connections that require electrical separation and physical protection. Tubing can be used in selected applications where the inside diameter, wall thickness, and electrical properties match the assembly design.
For compact assemblies, dimensional accuracy is especially important because the sleeve must fit within the available space without interfering with adjacent components.
How to Choose the Right Tube Dimensions
Incorrect sizing can make an insulation sleeve difficult to install or unsuitable for its intended position. Before ordering, buyers should confirm three primary dimensions.
Inside diameter: This should correspond to the outer dimensions of the wire, connection, or component being covered. An undersized tube may be difficult to fit, while an oversized one may not remain properly positioned.
Wall thickness: The required thickness depends on the insulation and mechanical protection needs of the application, as well as available installation space.
Length: The selected length should cover the intended area, including exposed connection sections where additional insulation is required.
In addition to dimensions, procurement teams should provide information about the operating temperature, electrical conditions, surrounding chemicals, and installation environment. This enables the manufacturer to assess whether the requested configuration is appropriate.
The Polyimide Film Tubing SB-PFT is available in light yellow as a standard color, with multiple dimensional options and custom sizing upon request. Providing a clear technical specification at the inquiry stage can help reduce unnecessary sample revisions and improve communication between the buyer and manufacturer.
What to Consider When Choosing an Insulation Tubing Manufacturer
Product specifications are important, but manufacturing consistency also affects the suitability of insulation sleeves for industrial use. Material control, production equipment, testing capability, and quality management all contribute to the reliability of repeated orders.
Established in 2003, Shenzhen Sunbow Insulation Materials MFG. Co., Ltd. specializes in the research, development, manufacturing, and sales of electrical insulation sleeves. Its product portfolio includes fiberglass sleeving, heat shrinkable tubing, PVC tubing, silicone rubber tubing, PTFE tubing, expandable sleeving, corrugated pipes, and polyimide film tubing.
The company has developed its manufacturing operations through continued investment in production and testing capabilities. Its facilities in Shenzhen and Dongguan cover approximately 20,000 m², with a reported monthly output exceeding 40 million meters of various insulation sleeves. Its R&D team and manufacturing infrastructure support product development and customized requirements.
Sunbow reports holding more than 60 patents and has received recognition as a Shenzhen High-tech Enterprise and a National High-tech Enterprise. Its quality management certifications include ISO 9001:2015 and IATF 16949:2016.
The company's product range serves applications across motors, household appliances, electric heating equipment, transformers, electronic wiring harnesses, power distribution systems, new energy vehicles, energy storage, and other industrial sectors.
Its products are also supplied to customers in international markets, including companies in the automotive, electrical appliance, and industrial equipment sectors. For automotive-related applications, Sunbow reports that its products have been indexed in the International Material Data System (IMDS) as part of its supply-chain activities.
For procurement teams, these manufacturing capabilities provide useful context when evaluating a potential supplier. Buyers should still review the technical datasheet, relevant test reports, certifications applicable to the specific product, and sample quality before approving a material for production.
Conclusion
Selecting insulation tubing for demanding electrical equipment requires more than checking its nominal temperature range. Engineers need to evaluate the complete set of thermal, electrical, mechanical, and environmental requirements, then match the tube dimensions to the components being protected.
With a twisted polyimide film structure, specialized adhesive bonding, a stated working temperature range of -60°C to +220°C, and multiple size options, Polyimide Film Tubing SB-PFT can be considered for suitable applications involving motors, transformers, wiring connections, heating equipment, and electronic assemblies.
For manufacturers seeking insulation materials supported by established production capacity and technical development experience, Shenzhen Sunbow Insulation Materials MFG. Co., Ltd. offers a broad portfolio of sleeve products and manufacturing services. Careful specification review and application-based verification remain essential steps in choosing the right tubing for long-term equipment use.
www.sunbowtech.com
Shenzhen Sunbow Insulation Materials MFG. Co., Ltd.

