As a modern lighting and decoration tool, LED candle lights are deeply loved by people for their energy-saving, environmental protection and safety. However, when LED candle lights are not in use, how to store them correctly to extend their service life and maintain their performance? This article will discuss in detail the storage methods and precautions of LED candle lights.
1. Selection of storage environment
Dry and ventilated environment: LED candle lights should be stored in a dry and well-ventilated environment. A humid environment will cause the circuit board and battery parts to be damp, thus affecting their normal operation. Long-term moisture may also cause safety hazards such as short circuits.
Avoid direct sunlight: Long-term exposure to sunlight will cause the LED candle light shell material to age, especially plastic or silicone shells, which may become fragile or even crack. In addition, ultraviolet rays in sunlight can also damage electronic components.
Suitable temperature: The ideal storage temperature should be between -20℃ and 40℃. Too high or too low temperatures will affect the performance of the battery, and in extreme cases may cause battery leakage or explosion.
2. Preparation before storage
Cleaning lamps: Before storage, make sure that the surface of the LED candle light is clean and dust-free. You can use a soft dry cloth to gently wipe the surface of the lamp. Avoid using a wet cloth or chemical cleaners to avoid damaging the surface of the lamp or the internal circuit.
Check the battery status: For LED candle lights with batteries, it is recommended to check the battery power before storage. If the power is low, it is best to charge it to about 50% before storing it to avoid excessive discharge and damage to the battery when it is not used for a long time.
Turn off the power switch: Make sure the power switch of the LED candle light is in the off state to prevent accidental opening during storage, causing the battery to run out or heat up.
3. Specific storage method
Use the original packaging box: If possible, it is best to put the LED candle light back into its original packaging box. The original packaging is usually designed with shockproof, moisture-proof and other functions to better protect the lamp. If there is no original packaging box, you can choose a box of suitable size and sturdy material as an alternative.
Add cushioning material: Adding some cushioning material (such as foam plastic, bubble film, etc.) inside the box can effectively reduce the impact and vibration caused to the LED candle light during transportation or movement.
Classified storage: If there are multiple LED candle lights that need to be stored, it is recommended to classify and store them according to type, size or purpose. This not only makes it easier to manage and find, but also avoids mutual friction and collision between different lamps.
Marking information: Putting labels or notes on the outside of the box (such as lamp type, quantity, storage date, etc.) will help quickly identify and manage the stored LED candle lights.
4. Regular inspection and maintenance
Regular inspection: Every once in a while (such as every three months or six months), the box where the LED candle lights are stored should be opened for inspection. Check whether the lamps are damaged, deformed or moldy, and check whether the battery status is normal.
Replacement of batteries: For LED candle lights that are not used for a long time, it is recommended to replace the batteries every year or so to ensure that the battery performance is stable and will not fail due to long-term storage.
Cleaning and maintenance: If dust or stains are found on the surface of the LED candle light, it should be cleaned with a soft dry cloth in time. For stains that are difficult to remove, you can use a small amount of alcohol to gently wipe it, but avoid using too much liquid or corrosive detergent.
5. Storage under special circumstances
Outdoor LED candle lights: For LED candle lights used outdoors, because they are often exposed to harsh environments (such as wind, rain, sun, etc.), they need to be cleaned and inspected more thoroughly before storage. At the same time, it is recommended to choose packaging materials with better waterproof performance for storage and place them in a dry and ventilated place.
LED candle lights for holiday decoration: For LED candle lights that are only used on specific holidays or occasions (such as Christmas, Halloween, etc.), they can be cleaned and inspected immediately after the holiday and stored according to the above method. This ensures that these LED candle lights can still maintain good working condition when the next holiday comes.
In short, the correct storage method is essential to extend the service life of LED candle lights and maintain their performance. By choosing the right storage environment, making good preparations before storage, using the correct storage method, and regular inspection and maintenance, we can ensure that the LED candle lights are properly protected when not in use and put into use at any time when needed.
https://www.junemfg.com/
Wuxi Chang Ou Photoelectric Technology Co., Ltd
